Profile 6, 2-Piece Adjustable Ridge, Inner Half Only, Close Fitting
Technical Specifications
- Coverage - 1016mm
- Profile - Profile 6/Big Six
- Profile Dimensions - Pitch-146mm - Depth-48mm
- Type - Inner Half Close Fitting
- Material - Fibre Cement
- Colour - Natural Grey
- CE Cert - CE/FP/001
- Weight - 6.35kg
- Used together with an outer half piece, they create a ridge for the Profile 6Â Fibre Cement Sheets.
- THIS IS HALF OF A RIDGEÂ - YOU WILL NEED AN OUTER HALF PIECE TO MAKE A FULLÂ RIDGE
- The design of the ridge matches with the Profile 6 Fibre Cement sheets
- The angle of your roof does not matter, these can be adjusted to suit the pitch perfectly.
- Fibre Cement is most commonly fitted to agricultural and industrial roofs as well as garages.
- Southern Sheeting also supply Fibre Cement Sheets in both Profile 3 and Profile 6, Ridges, External Corners as well as fixings into Timber and Steel, including Hookbolts.
- Aesthetically pleasing way to finish off the end of a Profile 6 roof at the gable end peak
- Single piece solution
- Long lasting fibre cement (life expectancy of 25 years)
- Fibre cement does not condensate
- Etex fibre cement is semi compressed, meaning it can absorb more moisture
- Durable, rust and rot resistant to any chemical influence
- The ONLY British manufacturer of fibre cement roof sheet products
- We stock all fibre cement sheets, accessories and fixings
- Natural Grey colour is a Neutral colour
What else do I need?
You will need to purchase the Outer half separately to make a Full Ridge.
Fixing wise, you use the same fixings that you would for the Fibre Cement Sheets which these are fixing to.
Why is this a Two-Piece product?
This ridge is designed in two half’s mainly due to its design allowing you to adjust them to the correct angle, whilst still maintaining the useful properties of Fibre Cement.
I have installed these, and the underside appears to have damp patches or is leaking, what should I do?
Part of the natural curing of a Fibre Cement product is that it soaks up more moisture for up to 6 months after it is installed, this creates damp looking patches which would show in random parts on the underside of the product, these may be damp to touch but should not drip. These damp patches may move about. If the product is leaking and dripping or very damp, there may be an issue with sealing or a fixing, check that sheets are Mitred and that the correct mastic has been used in the correct Lap and End Lap joints of the sheet / fibre cement product. Alternatively, check if the leak is specifically around a fixing point, indicating the fixing is too tight or too loose.
What material is this?
Semi-Compressed Fibre Cement in its natural grey finish.
Are these asbestos?
Fibre Cement does NOT contain asbestos fibres as traditionally used in manufacture of similar products, instead the material is made with a synthetic fibre.
Find the right materials and support for your project
We can help! View our supportive help guides and videos.
Our supportive guides and help videos will help you achieve the best results. Our knowledgeable team can also offer helpful tips, and support to help you plan and purchase what you need!