Foam Filler, 1000/26, 1m long, Pair, Polyethylene, Bi-Colour (Black/White)
- Buy 49.99 for £2.27 £1.89 each and save 10%
Technical Specifications
- Profile - 1000/26B
- Profile Dimensions - 26mm depth x 125mm pitch x 28mm valley x 28mm crown
- Material - Polyethylene
- Colour - Black/White
- Density - 30kg/m3
- Thickness - 25mm
- Quantity - Pair
Foam Filler, 1000/26, 1m long, Pair, Polyethylene, Bi-Colour (Black/White)
- Sold as pairs (long flute and short flute foam fillers)
- The "Long Flute" half of the pair will sit on top of the sheeting and fill the profile between the sheet and the ridge or abutment flashing
- The "Short Flute" half of the pair is pinned below the sheet at the eaves line
- Bi-colour Polyethylene (Black on one side white on the other)
Pitch (Centre of Crown to Centre of the next Crown) - 125mm
Depth (Vally, Vertically upwards) - 26mm
Overal Width - 1083mm
Cover Width - 1000mm
- Very lightweight
- Easy to install
- Suited to the profile
- Comes in a pair for top and underside of the sheet
- Blocks dust, nesting animals, water and water vapour
What are profiled foam fillers used for?
Foam fillers are used for sealing roofing and cladding profiles against dust, nesting animals, water, and water vapour.
Why do they come in a pair?
The foam filler comes in a pair so that you can have one part for the top part of the profile that would go between the sheet and ridge flashing and another part for the fitting between the sheet and the eaves, this means both ends have a filler.
How do you seal the foam filler?
A foam filler can bet wedged in without any sealant, however we recommend you either use our BR premseal sealant or lap mastic to keep it fitted and provide a good seal.
When should I fit them?
Ideally a foam filler is fitted before the installation of the part that goes above it, this allows you to put your run of sealant underneath and on top of the filler.
How durable are foam fillers?
Most of the profiled fillers have a minimum life expectancy of 20 years dependant on conditions.
What colour is this foam filler?
This foam filler comes in a black & white finish.
I cannot see my foam filler profile, can you still source it?
If you have a profile that you cannot find on our website. Please download our app to help identify the profile and give our sales team a call. If you do not have access to our app, please contact us and we can help you find the required measurements needed to identify it.
Find the right materials and support for your project
We can help! View our supportive help guides and videos.
Our supportive guides and help videos will help you achieve the best results. Our knowledgeable team can also offer helpful tips, and support to help you plan and purchase what you need!