End Profile 45 for Cedral Lap - CL104 Light Oak

 End Profile 45 for Cedral Lap - CL104 Light Oak

• End Profile 45 for use with Cedral weatherboard lap system. 
  
• 3000m long x 45mm x 26mm x 10mm x 17mm. 
  
• Please note that these trims must be installed before the boards are installed with the 45mm leg sitting behind the boards.  End Profile 45's are designed to sit on top of the batten, depending on the use, the side of the batten may be seen (i.e. if the run of cladding finishes half way along a wall).  For a trim that also covers a 38mm batten, please use an End Profile 65.  Any questions on which trim to use, please do not hesitate top ask our sales team 
  
• All colour matched trims are supplied in 3m lengths and manufactured in 0.9mm thick aluminium.  End Profile 45s are available in 23 different colours to suit all Cedral planks 
  
• Southern Sheeting stock and supply our own range of colour matched trims to suit Cedral boards.  These are manufactured from the same high quality material that Etex use, the only difference being that our trims do not include the embossed 'Cedral' logo on them.  Whilst the colour matches are good, we do not recommend using our trims butted up directly to Cedral own trims as you may see a very slight colour variance.  (You will not notice any colour variance on trims installed a few metres apart).