87mm dia, Steel Downpipe Holder Painted

How many steel downpipe holders will I need?
RoofArt downpipe holders are required to be spaced no more than 1.5m apart. As a general rule you should include 2 steel downpipe clips per 3m length of downpipe.

How do I install steel downpipe holders?
There are various ways to mount to the RoofArt downpipe holder to the wall depending on what surface you are mounting to. Please watch the RoofArt installation video for different option on wall mounting. To secure the downpipe into the holder simply clasp the two halves together until the teeth lock together. Note that the grip around the pipe is very tight and can need some force to ensure the teeth lock into place properly.

How do I remove a steel downpipe from the holder?
In order to release the grip from the holder you will need to carefully insert a flat head screwdriver into the clasp to unlock and release the holder from the pipe.

How can I offset the pipe further from the wall?
There are two ways to mount the pipe holder further from the wall. 1) Cut the wings off the holder and use a long pan head screw with sleeve through the pack of the holder directly into the wall. 2) Create timber blocks to pack out the gap from wall to pipe holder.

Can I fix the downpipe holder to corrugated or box profile steel sheeting?
Yes, by lining the downpipe up so it runs down the crown of the cladding sheet, you can cut the wings of the pipe holder and rivet it directly to the crown of the profiled sheet.