3.000m long, Abutment Flashing 32/1000 Juniper Green, 200mm x 200mm x 100°, Polyester Coated
- Buy 19.99 for £25.52 £21.27 each and save 5%
Technical Specifications
- Length - 3.000m
- Dimensions - 200mm x 200mm
- Angle - 90deg
- Finish - Painted Polyester Coating
- Material - Galvanised Steel
- Colour - Anthracite (RAL 7016)
- Thickness - 0.5mm
- Weight - 5.76kg
- Colour Side - External
- Lap - 100mm mimimum
- Edges - Welted
The abutment flashing is to be used where a roof meets an upright wall to cover the void where the sheets meets the wall using a 22mm stitcher to fix it to the roof sheet.
This abutment is manufactured in a polyester finish in juniper green (BS 12B29) and is manufactured in a 3.000m length. It is made to a 100 degree angle to suit a 10 degree roof pitch but there is some flexibility in it. This is manufactured in a 0.5mm gauge.
- Lightweight & easy to handle
- Easy to install
- Colour matched to sheets
- Welted for extra rigidty
Where do I use an external corner flashing?
An external corner flashing is used to cap the roof sheets at the sides of the roofs.
How much should I lap the external corners over one another?
You should have a minimum of 150mm for lapping the ridges.
How do I fix the external corner flashing?
You want to use the stitchers screws to stitch the external corner flashing to the top of the corrugation that the external corner flashing projects out to .
Can I get different sized flashings?
Yes, we can manufacture made to order flashings. If you want to make an enquiry, please contact our sales team.
Can Southern Sheeting cut flashings?
Southern Sheeting will not cut stock flashings. Made to order flashings can be cut to different lengths and girths.
Find the right materials and support for your project
We can help! View our supportive help guides and videos.
Our supportive guides and help videos will help you achieve the best results. Our knowledgeable team can also offer helpful tips, and support to help you plan and purchase what you need!