Same day courier dispatch*
Fast delivery up to 5 working days
Extensive range and stock holding

100mm dia, Steel Downpipe Connector - Plain Galvanised

Item
RA1CON100-GV
£6.49 £5.41
39 In Stock

payment-logos
  • Buy 5 for £6.17 £5.14 each and save 5%
  • Buy 11 for £5.84 £4.87 each and save 10%
  • Buy 14 for £5.20 £4.33 each and save 20%
  • Buy 24 for £4.55 £3.79 each and save 30%
  • Buy 34 for £3.89 £3.24 each and save 40%
  • Buy 49 for £3.58 £2.98 each and save 45%
  • Buy 59 for £3.26 £2.72 each and save 50%
  • Buy 74 for £2.92 £2.43 each and save 55%

Technical Specifications

  • Overall Height - 110mm
  • Diameter at Top (female end) - 103mm
  • Diameter at Bottom (male end) - 98mm
  • Socket Length - 50mm
  • Material - Galvanised Steel
  • Material Thickness - 0.7mm
  • Manufacturer's Warranty - 5 Years

 

  • 100mm Galvanised Downpipe Connector.
  • To connect to straight lengths of pipe if the male end has been cut off.
  • Female to end to sleeve over plain end of 100mm downpipe.
  • Socketed male end to fit inside plain end of pipe.
  • This item is only required when connecting two plain ends (cut ends) of pipe. If you are using full lengths of either 1m or 3m pipe then it will have a male socketed end.
  • Stylish branded design
  • Connect two plain ended pipes together
  • Simple push fit design
  • 5 years manufacturer's warranty
  • Fully recyclable product

Why would I need a downpipe connector?
If you are trying to connect two plain pieces of pipe you would need to use a downpipe connector.  We would always advise that you use full lengths of pipe incorporating the male socketed end which will give a neater finish than the downpipe connector.  Nevertheless, the connector can be a useful accessory that can save the need to buy additional length of downpipe.

How do you install the connector?
The steel downpipe connector socket could not be easier to install.  Simply insert the male end into the lower pipe and feed the higher pipe into the female end.  For additional security, you could use a small screw or rivet at the join, but this is rarely needed once the downpipe holders keep the pipe locked firmly in place.
 

Customer Questions
No Customer Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:100mm dia, Steel Downpipe Connector - Plain Galvanised
Your Rating
Frequently Bought Together

Find the right materials and support for your project

We can help! View our supportive help guides and videos.

Our supportive guides and help videos will help you achieve the best results. Our knowledgeable team can also offer helpful tips, and support to help you plan and purchase what you need!